Replacing Consumables
59
Maintenance
3
Important • To prevent electric shock, always turn off the machine and disconnect the power cable from
the grounded outlet before performing maintenance.
• Do not touch the five gray-colored sponge parts on the back side of the waste toner
container. Otherwise, your hands may get dirty with toner.
• When replacing the waste toner container, toner may spill and soil the floor. We recommend
laying paper on the floor beforehand.
• The proper disposal of used waste toner containers is required. Return the old waste toner
container to our Customer Support Center.
• The use of waste toner containers not recommended by Fuji Xerox may degrade image
quality and performance. Use only waste toner containers recommended by Fuji Xerox.
1 Make sure that the machine is not operating,
and open the front cover.
2 Hook your finger under the waste toner
container handle.
3 Pull out the waste toner container slowly
while holding its left side with one hand.
Important • Be careful not to drop the waste toner
container while you are removing it.
Important • Do not touch the shutter part as shown in
the illustration. Toner can dirty and stain
your hands.
• Be careful not to spill toner when handling
the waste toner container.
z
Never throw a waste toner container
into an open flame. Toner may catch
fire and cause burn injuries or
explosion.
If you have a used waste toner
container no longer needed, contact
your local Fuji Xerox representative for
its disposal.
To Next Page
Loading...
