Fuji Xerox DocuPrint CM505 da - Installing the Docuprint CM500 Series Upgrade Kit (Optional)

14 Appendix
584
Appendix
14
Installing the DocuPrint CM500 Series Upgrade Kit (Optional)
This section describes how to install the DocuPrint CM500 Series Upgrade Kit
(optional) to the machine.
1 Switch off the power, and then switch off the main power.
For information on how to switch off the power and the main power, refer to "2 Product Overview" >
"Power Source" in the User Guide.
2 Unplug the power cord from the power
outlet.
3 Loosen the two screws that secure the rear
left cover to the machine.
Important • Do not remove the screws, just loosen
them.
4 Open the rear right cover.