EasyManuals Logo

Fuji Xerox DocuPrint CM505 da Administrator's Guide

Fuji Xerox DocuPrint CM505 da
599 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #260 background imageLoading...
Page #260 background image
7 Printer Environment Settings
260
Printer Environment Settings
7
Print Overview
This machine can be set up as a local printer by directly connecting the machine to a
computer using a USB interface cable. Similarly, it can be set up as a network printer
by connecting the machine to a network.
Enable the necessary port using the control panel or CentreWare Internet Services.
Note • The print drivers are contained in the Driver CD Kit. For information on the driver installation
procedures, refer to the manual contained in the Driver CD Kit.
• You can download the latest print driver from our web site.
Using the Machine as a Local Printer
USB
Use a USB interface cable to directly connect the machine to a computer.
For more information on how to set up the machine using USB connection, refer to "Installation When
Using USB Port" (P.263).
Using the Machine as a Network Printer
To set up the machine as a network printer, the following protocols are available to
connect the machine.
LPD
Use LPD when direct communication between the machine and a computer via TCP/
IP is available.
For more information on how to set up the machine using LPD, refer to "Installation When Using TCP/
IP (LPD/Port 9100)" (P.265).
NetWare
The machine supports the PServer mode using Netware directory service and bindery
service. The PServer mode enables the machine to function as a printer server, and to
retrieve print jobs in the print queue to output. The printer created for the machine
consumes one user license of the file server.
Note • The machine does not support Remote Printer (RPrinter) mode.
• You can use the machine as a printer in a NDPS environment by using a Novell NDPS
Gateway. To use the machine as a printer in a NDPS environment, you need to have the
machine operating in a NetWare print environment beforehand, or enable LPD in advance
and set it as a gateway destination in a Novell NDPS Gateway setup. Attributes, however,
that can be set or obtained by NDPS are not supported.
Network connection
LPD/ SMB/ Port9100/ EtherTalk
Network connection
Netware/ Windows shared printer
Via Internet
IPP
Local connection
USB

Table of Contents

Other manuals for Fuji Xerox DocuPrint CM505 da

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuPrint CM505 da and is the answer not in the manual?

Fuji Xerox DocuPrint CM505 da Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuPrint CM505 da
CategoryAll in One Printer
LanguageEnglish

Related product manuals