6 CentreWare Internet Services Settings
256
CentreWare Internet Services Settings
6
Notify Job Completion
by E-mail
Select from [Properties]
tab > [General Setup] >
[Alert Notification]
Refer to "Notify Job Completion by E-
mail" (P.147).
E-mail Notification for
Machine Status
Allows you to configure the recipient of
the notification and a status of which to
be notified.
Usage Counters Select from [Properties]
tab > [General Setup] >
[Counters]
Displays the total number of pages
printed for each service.
Port Settings Select from [Properties]
tab > [Connectivity]
Refer to "Port Settings" (P.162).
Physical Connections Refer to "Port Settings" (P.162).
Protocols Refer to "Protocol Settings" (P.166).
Language Emulations Select from [Properties]
tab > [Services] >
[Printing]
Refer to "Print Mode" (P.110).
E-mail Select from [Properties]
tab > [Services]
Refer to "E-mail/Internet Fax Service
Settings" (P.207).
Internet Fax Refer to "E-mail/Internet Fax Service
Settings" (P.207).
Fax Refer to "Fax Service Settings" (P.196).
Scan to PC Refer to "Configuration of Scan to PC"
(P.290).
Scan to Home Refer to "Configuration of Scan to Home"
(P.297).
Network Scanning Refer to "Configuration of Network
Scanning (Job Template Scanning)"
(P.294).
Store & Send Link Refer to "Configuration of Store & Send
Link" (P.302).
Store to USB Refer to "Store to USB" (P.286).
Accounting Select from [Properties]
tab
Refer to "Accounting" (P.232).
Authentication
Configuration
Select from [Properties]
tab > [Security]
Refer to "Authentication" (P.241).
User Details Setup Refer to "User Details Setup" (P.243).
Create Authorization
Groups
Refer to "Create Authorization Groups"
(P.243).
Remote Authentication
Servers
Refer to "Remote Authentication /
Directory Service" (P.172).
IP Filtering Allows you to configure the IPs to permit
access, for IPv4 and IPv6 respectively.
Unbounded Port Allows you to set unbounded port
numbers.
Audit Log Allows you to enable the Audit Log
feature that logs the operation on the
machine, and retrieve the audit log.
Item How to Select Overview/Reference