Loading Paper
43
Paper and Other Media
2
1 Pull out the tray until it stops.
Important • While the machine is processing a job, do
not pull out the tray that is being used for
the job.
• To prevent paper jams or erroneous
detection of loaded paper in a tray by the
machine, do not add paper on top of any
remaining paper in the tray. Remove any
remaining paper in the tray, and then load
that paper on top of the newly loaded
paper.
2 While pinching the two paper guides, move
them to the edges of the tray.
3 Before loading the paper, flex the sheets
back and forth, and then fan them.
4 Load and align the edges of the paper
against the paper guides, with the side to be
copied or printed on facing up.
5 While pinching the two paper guides, lightly
align the edges to the edge of the paper.
Note • When loading standard size paper in the
tray, move the paper guides to the marks
corresponding to the paper size.
To Next Page
Loading...
Need help?
General
