Common Service Settings
141
Tools
5
For example, you can use a name showing its usage, such as "Color" for colored paper, and
"Covers" for bond paper.
For information about how to enter characters, refer to "Entering Text" (P.32).
Paper Tray Attributes
You can set the size and type of paper loaded in trays.
For more information, refer to "Changing the Paper Settings" (P.50).
îš„Change Settings
Select this button, if you change the paper size for the tray or the setting of auto paper
selection.
When you load non-standard size paper in a tray, select [Custom Size], and specify the width
and length. When you load standard size paper in a tray, select [Auto Detect].
Important • Align the paper guides against the paper to prevent paper jams or errors. If the machine
cannot detect a tray, use Tray 5.
z
Paper Type
Select the type of paper to load in the trays.
For information about paper types available on the machine, refer to "Loadable Quantity and Weight for
Supported Paper" (P.34).
z
Paper Size
When using Trays 1 to 4, you can load both standard size paper and non-standard size
paper. When you load non-standard size paper, select [Custom Size], and then set the size
in the X (width) between 190 - 356 mm and the Y (length) between 98 - 216 mm in 1 mm
increments. When loading standard size paper, select [Auto Size Detect].
z
Paper Color
Set the color of paper. The paper color selected here is displayed as the paper color on the
[Paper Supply] screen.
z
Auto Paper Select
Set the condition for Auto Paper selection. When the color mode selected is used, Auto Paper
selection is enabled. Select from [All Colors], [Color], and [Black & White].
Automatic tray selection means that a tray containing the appropriate paper is automatically
selected by the machine for copying or printing.
Customize Paper Supply Screen
Select whether the setting items specified in [Paper Size] or [Auto Paper Select] in [Paper
Tray Attributes] are to be displayed on the [Paper Supply] screen.
îš„Disabled
Does not display the items specified in [Paper Size].
îš„Size Detection
Displays the setting in [Paper Size].
îš„Usage (Auto Paper Select)
Displays the setting in [Auto Paper Select].
Paper Tray Attributes on Setup Screen
Select whether or not to display [Paper Tray Attributes] in the [Setup] screen or not.
This setting allows you to select the size and type of paper without entering the System
Administration mode.
Paper Tray Attributes During Loading
Select whether or not to display the [Paper Tray Attributes] screen after the tray is pulled out
or inserted in.
This setting applies to Trays 1 and 2 to 4 (optional). You cannot apply this setting to Tray 5.
To Next Page
Loading...
Need help?
General
