5 Tools
176
Tools
5
îš„Attribute Type of Surname
Set the sender's family name attribute type. Up to 32 characters are allowed.
îš„Attribute Type of Given Name
Set the sender's first name attribute type. Up to 32 characters are allowed.
îš„Attribute Type of E-mail Address
Set the e-mail address attribute type. Enter a field attribute name to be used as e-mail
information from the user information registered on the LDAP server. Up to 32 characters are
allowed. For Windows, enter "mail" for an attribute name used as e-mail information.
îš„Attribute Type of Fax Number
Set the fax number attribute type. Up to 32 characters are allowed.
îš„Attribute Type of E-mail (Internet Fax)
Set the Internet fax address attribute type. Up to 32 characters are allowed.
îš„Attribute Type of Custom Items 1, 2, and 3
Set the LDAP attribute type of custom items 1 to 3. In addition to [Attribute Type of Name] and
[Attribute Type of E-mail Address], you can assign user attributes registered on the LDAP
server for a search. Up to 32 characters are allowed.
îš„Attribute Name of Custom Items 1, 2, and 3
Set the attribute names assigned to custom items 1 to 3. Up to 16 single-byte characters are
allowed.
Note • To encrypt communications using this feature, a trusted root certificate authority and all
intermediate certificate authorities that are registered in the path of a certificate to use must
be registered.
îš„Attribute Type of Certificate
Set the certificate attribute type. Select and enter the field name to use as a certificate from
among the user information registered on the LDAP server. Up to 32 single-byte characters
are allowed.
For Windows, enter "userCertificate;binary" for an attribute name used as certificate
information. The information is used as an S/MIME certificate when you specify an address
using the directory service to encrypt e-mail transmission by S/MIME.
Note • To encrypt communications using this feature, a trusted root certificate authority and all
intermediate certificate authorities that are registered in the path of a certificate to use must
be registered.
îš„Maximum Number of Search Results
Set a maximum number of address to display from search results from 5 to 100. If the search
results exceed the maximum, the search stops at the maximum number set. The default
value is 50.
îš„Search Time-Out
Select whether or not to set a search time-out. Set the value from 5 to 120 seconds in 1
second increments.
îš„Directory Service for Address Book
Select whether or not to use an address book stored on the directory server.
Even when [Enabled] is selected, the address book of the directory server will not be started
unless the following conditions are satisfied.
z
The IP address of the directory server (primary) of the machine must be set.
z
The IP address or Internet address of the directory server (primary) must be set.
z
The port numbers used for LDAP communication must be set on the directory server and the
machine.
To Next Page
Loading...
Need help?
General
