Fax Service Settings
199
Tools
5
Manual Redial List - Saved Entries
Specify the number of redial destinations saved.
Manual Redial List - Dial Mode
Specify the destination type saved as a redial destination number.
When you deselect all the check boxes, the Redial feature becomes disabled.
Transmission Header Text - Polling
Set whether or not to attach a transmission header to a polling file.
A polling is the function that a document is stored in the machine's public folder for polling,
and can then be sent by an operation from the other party.
Polled Files - Auto Delete
Set whether or not to automatically delete a polling file after transmission.
Rotate 90 degrees
Set whether or not to automatically rotate a document if its image must be reduced in size
unless it is rotated.
Note • If an arbitrary magnification is specified in [Reduce / Enlarge], the Rotate 90 Degrees feature
does not function.
Sender ID
For G3 communications, you can select whether to notify G3-ID to recipients.
Save Undelivered Faxes
Set whether or not to save a fax document if a fax transmission fails. When [Yes] is selected,
the [Undelivered Faxes] button appears on the [Secure Print Jobs & More] tab of the [Job
Status] screen. Select this button to send the fax document again.
For details on Undelivered Faxes, refer to "11 Job Status" > "Printing and Deleting Stored Jobs" >
"Undelivered Faxes" in the User Guide.
Save Deleted Faxes
When [Yes] is selected for [Save Undelivered Faxes], set whether or not to save cancelled
faxes.
Saved Faxes - Auto Delete
When [Yes] is selected for [Save Undelivered Faxes], set whether or not to automatically
delete saved faxes in 24 hours.
Transmission Interval
Specify a value for the interval between the end of one transmission and the beginning of the
next, from 3 to 255 seconds in 1 second increments.
A longer transmission interval increases the total time to send a broadcast transmission, but
allows calls to be received during the standby time.
Batch Send
When the machine stores multiple faxes addressed to a destination, enabling the Batch Send
feature allows you to send them all at the same time in a single fax transmission. By using
this feature, you can reduce your communication costs.
Select whether or not to enable the Batch Send feature.
Note that a batch send is not available for manual transmissions, broadcasts, relay
broadcasts, remote folder, and delayed start transmission with a specified time before the
To Next Page
Loading...
Need help?
General
