EasyManuals Logo

Fuji Xerox DocuPrint CM505 da Administrator's Guide

Fuji Xerox DocuPrint CM505 da
599 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #512 background imageLoading...
Page #512 background image
14 Appendix
512
Appendix
14
Paper tray 3 Sets the paper tray to be used for printing.
[0] : Auto
[1] (Default) : Tray 1
[2] : Tray 2
[3] : Tray 3
[4] : Tray 4
[5] : Tray 5
If printing from Tray 5, instruct printing and then operate the machine to
start printing. To cancel the setting, change the setting for "Tray 5
Confirmation".
Important •When Trays 1 to 4 is selected, the paper size is determined by the
size of paper loaded in the tray, and thus [Paper Size] cannot be set.
Note • When [Auto] is selected and paper of the same size in the same
orientation is loaded in multiple trays, paper will be fed in the order of
Tray 1 J Tray 2 J Tray 3 J Tray 4. If paper of the same size is
loaded in multiple trays but in different orientations, feeding of the
paper loaded in the landscape orientation is prioritized.
Document size 1 Sets the client-created document size.
[99] (Default) : Paper
[100] : Continuous form paper (10 x 12)
[101] : Continuous form paper (10 x 11)
[102] : Continuous form paper (15 x 12)
[103] : Continuous form paper (15 x 11)
[4] : A4
[5] : A5
[15] : B5
[21] : 8.5 x 14
[22] : 8.5 x 13
[23] : 8.5 x 11
[0] : Postcard
The number of characters printed is: 80 characters/72 rows for
continuous form paper (10 x 12), 80 characters/66 rows for continuous
form paper (10 x 11), 136 characters/72 rows for continuous form paper
(15 x 12), and 136 characters/66 rows for continuous form paper (15 x
11).
Note •When a continuous form paper is selected for [Original Size], [Paper
Position] cannot be set.
•When [Preset%] or [Fit to Cut Sheet] is selected for [Reduce /
Enlarge], the machine automatically calculates the magnification
based on a combination of [Original Size] and [Paper Size]. If the
ratio, however, is outside the range of 45-210%, the document will not
be reduced/enlarged, and will be printed at a scale of 100%. When [2
Up] is selected, the machine automatically calculates the
magnification based on a combination of [Original Size] and 1/2 of
[Paper Size].
•The orientation set here is that of the document. It is not affected by
the orientation of paper loaded in the paper trays.
Orientation 19 Sets the orientation of paper.
[0] (Default) : Portrait
[1] : Landscape
Setting Item
Item
Number
Value

Table of Contents

Other manuals for Fuji Xerox DocuPrint CM505 da

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox DocuPrint CM505 da and is the answer not in the manual?

Fuji Xerox DocuPrint CM505 da Specifications

General IconGeneral
BrandFuji Xerox
ModelDocuPrint CM505 da
CategoryAll in One Printer
LanguageEnglish

Related product manuals