PDF Direct Print
525
Appendix
14
Layout 405 Sets the layout for printing.
Note • This item can be set when [PDF Bridge] is selected for [Print
Processing Mode].
[0] (Default) : Auto %
[1] : Booklet
[2] : 2-up
[3] : 4-up
[4] : 100% (size-by-size)
The [Auto %] setting automatically calculates the largest magnification
possible to fit to the output paper size.
The [Booklet] setting prints the images side by side, on both sides of each
page, in the correct order to make a booklet based on the layout of the
original PDF file. Some documents may not be printed in a booklet
fashion depending on the structure of their pages. In this case, they will
be printed with the [Auto %] setting.
Note • When [A4] is selected for [Paper Size], documents will be printed on
A4 size paper.
• When [Paper Size] is set to [Auto], documents will be printed on A4
size paper.
The [2-up] setting prints two pages onto one sheet of paper. When [2-Up]
is selected, the paper size is fixed at A4.
The [4-up] setting prints four pages on each sheet of paper. When [4-Up]
is selected, the paper size is fixed at A4.
Paper size 406 Sets the size of the paper to be printed.
[0] (Default) : Auto
[1] : A4
The [Auto] setting automatically determines the paper size, based on the
size and settings of a PDF file to be printed.
Output color 407 Sets whether to print in color or monochrome.
[0] (Default) : Auto
[1] : Black
The [Auto] setting automatically determines the output color: color or
monochrome for each page. If colors other than black and white are used
on the original, the machine prints the document in color, and if only black
and white are used on the original, the machine prints in monochrome.
Print processing
mode
408 Sets the print processing mode when you use the PDF Direct Print
feature.
[0] (Default) : PDF Bridge
[1] : PS
[PDF Bridge] processes PDF files using the PDF Direct Print feature
provided by Fuji Xerox.
[PS] processes PDF files using the PostScript feature provided by Adobe.
Note • The print results may differ between the [PDF Bridge] and [PS]
selections.
• When [PS] is selected, the [Layout] setting becomes invalid.
Setting Item
Item
Number
Value
To Next Page
Loading...
