Fuji Xerox DocuPrint CM505 da Administrator's Guide

3 Maintenance
80
Maintenance
3
1 Make sure that the machine is not operating,
and open the front cover.
2 Remove the cleaning bar from the back side
of the front cover.
3 Clean each of the laser scanners once with
the bar. Insert the cleaning bar into each
slot until it clicks, and then slowly slide the
bar back out.
4 Return the cleaning bar to the back side of
the front cover.
5 Close the front cover.
Note • If the front cover is not completely closed,
a message will appear and the machine
will remain paused.

Fuji Xerox DocuPrint CM505 da Specifications

General

Brand	Fuji Xerox
Model	DocuPrint CM505 da
Category	All in One Printer
Language	English