Managing units of the SE server Managing hardware
238 U41855-J-Z125-3-76
Displaying and changing IP interfaces of the SU x86
Ê Select Hardware → Units[ → <se server> (SE<model>)] → <unit> (SU<x86>) →
Information, IP interfaces tab.
The IP interfaces tab provides information about the unit's LAN interfaces. The following
function is available to you:
Changing the packet length in the case of LOCLAN and PCI interfaces
In the case of a PCI interface you can only change the packet length in normal operation,
i.e. the Status UP is displayed for the interface.
Ê Click on the Change icon by the required IP interface and select the required package
length in the subsequent dialog box.
Displaying FC interfaces of the SU x86
The FC interfaces tab provides information about the unit's Fibre Channel interfaces.
Ê Select Hardware → Units[ → <se server> (SE<model>)] → <unit> (SU<x86>) →
Information, FC interfaces tab.
Detailed information on the output is provided in the section “Displaying FC interfaces of the
MU” on page 206.
To Next Page
Loading...
Need help?
General