U41855-J-Z125-3-76 359
Dokuschablonen 19x24 Version 7.4de für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010
19. March 2018 Stand 18:42.31 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303912_BuV_062\BuV_e\buv.mix
Net Unit
Component of the SE server; enables an SE server to be connected to
customer networks (LAN/SAN). The Net Unit incorporates High Speed Net
Connect (HNC).
Parallel Access Volume (PAV)
Multiple I/O requests can be executed simultaneously to a logical volume. A
logical PAV volume is represented by a basic device and up to seven alias
devices.
PAV
See Parallel Access Volume (PAV).
SE Manager
Web-based user interface for SE servers. The SE Manager runs on the
Management Unit and permits central operation and administration of Server
Units (SU /390 and SU x86), Application Units (x86), Net Unit (including HNC),
and the storage.
SKP
service and console processor
An SKP enables servers with /390 architecture to be operated, the connected
devices to be managed, and remote service to be supported.
The term SKP is used in the three views hardware functionality, software
functionality, and device type:
hardware functionality
To operate, S servers require an SKP as a Hardware Unit. The SKP Hardware
Unit SKP is a PRIMERGY server which has a local console, a Host Controller,
and various ports for LAN connection and supporting remote service.
On the SE server the Management Unit (MU) provides this hardware
functionality for operating SU /390.
Software functionality
On an SKP Hardware Unit the SKP Manager provides the SKP functionality for
operating the S server and managing the devices and remote service.
On the SE server the SKP functionality is integrated into the SE Manager.
Device type
In BS2000 an SKP device type is used (e.g. SKP2).
To Next Page
Loading...
Need help?
General