*2: If "7" is specified for the number of volumes, sdv0, sdv1, sdv2, sdv3, sdv4, sdv5, and sdv6 volumes are created.
A confirmation screen appears.
4 Click the [OK] button.
The volume is created and the registration completion screen appears.
5 Click the [Done] button.
The screen returns to the [Volume] screen.
Copy Data Destination Volume (SDPV) Creation
Create a copy data destination volume in the backup RAID group.
Create a volume as an expansion area of SDV in the backup RAID group "RG1" created in "RAID Group Creation"
(page 109).
Figure 14 Copy Data Destination Volume (SDPV) Creation
Copy data destination volume
sdpv
(Snap Data Pool Volume)
500GB
Backup RAID group (RG1)
RAID5 (2+1)
1.92TB
1.92TB
1.92TB
6. Configuration Settings for RAID Groups or Thin Provisioning
When Using SnapOPC+ (SDVs and SDPVs)
118 Configuration Guide (Basic)
To Next Page
Loading...
