Fujitsu ETERNUS DX S5 Series - Figure 7 Example of Creating Operation Volume and Backup Volume

■
Example of the ETERNUS DX Environment Settings
Create the operation volume and backup volume in the ETERNUS DX.
Figure 7 Example of Creating Operation Volume and Backup Volume
ETERNUS DX
RAID group 0 (RAID5)
600GB × 5
RAID group 1 (RAID5)
1.92TB × 3
Standard
Snap Data Volume (SDV) (*1)
Snap Data Pool Volume (*2)
1TB
500GB
Generation management volume
Operation volume
Copy data destination volume
sdv0
sdpv
main
sdv1 sdv2 sdv3 sdv4 sdv5 sdv6
*1: SDV is used as the copy destination for SnapOPC+ and stores generation data.
*2: SDPV is the expansion area of the SDV and is used to configure the Snap Data Pool (SDP) area.
5. General Settings
66 Configuration Guide (Basic)