CA Port Group Creation
This function creates a new CA port group, and registers the port to be a member. This section uses FC port
groups as an example to show how to create CA port groups.
An FC port group is a group of ports whose CA type is FC and are connected to a specific host group. The Host
Affinity is specified for each FC port group.
• The maximum number of port groups per ETERNUS DX is 128, irrespective of the CA types.
• The maximum number of ports per port group is 8.
• A port can be a member of multiple port groups.
The procedure to create an FC port group is as follows:
1 Click [Create FC Port Group] in [Action].
The [Create FC Port Group] screen appears.
7. Host Interface Management
CA Port Group Creation
145 Configuration Guide (Basic)
To Next Page
Loading...
