Fujitsu ETERNUS DX S5 Series - Figure 35 Front View of a Controller Enclosure (for the ETERNUS DX500 S5;DX600 S5, with a Front Cover); Figure 36 Front View of a Controller Enclosure (for the ETERNUS DX500 S5;DX600 S5, Without a Front Cover)

■
ETERNUS DX500 S5/DX600 S5
Figure 35
Front View of a Controller Enclosure (for the ETERNUS DX500 S5/DX600 S5, with a Front Cover)
1
2
1 Operation panel (refer to "■ Operation Panel" (page 226))
2 Front cover
Figure 36
Front View of a Controller Enclosure (for the ETERNUS DX500 S5/DX600 S5, without a Front Cover)
1 2
3 3
BBU#1BBU#0
Slot#0 Slot#1 Slot#2 Slot#3 Slot#4 Slot#5 Slot#6 Slot#7 Slot#8 Slot#9
Slot#10 Slot#11 Slot#12 Slot#13 Slot#14 Slot#15 Slot#16 Slot#17 Slot#18 Slot#19 Slot#20 Slot#21 Slot#22 Slot#23
1 2.5" drive (refer to "■ Drives" (page 229))
2 2.5" drive / PCIe Flash Module
(Refer to "■ Drives" (page 229) and "■ PCIe Flash Modules (PFM)" (page 241))
3 Battery (BBU#0, BBU#1) (refer to "■ Batteries" (page 242))
A. Component Names
Controller Enclosure
217 Configuration Guide (Basic)