Fujitsu ETERNUS DX S5 Series - Figure 75 2.5 Drives and 3.5 Drives; Table 35 Status and Meaning of each LED (Drive)

■
Drives
2.5" drives and 3.5" drives have LEDs.
Figure 75 2.5" Drives and 3.5" Drives
DRIVE READY LED
DRIVE FAULT LED
DRIVE FAULT LED
DRIVE READY LED
2.5" drive 3.5" drive Drive for high-density drive enclosure
The LEDs turn on or blink to indicate the statuses that are listed below.
Table 35
Status and Meaning of Each LED (Drive)
LED name LED status Meaning
DRIVE READY
(green)
The drive is in normal status.
(blinks green)
DRIVE FAULT
(amber)
• The drive is in error status.
• The LED light up operation was performed from the ETERNUS CLI
command line in order to identify the drive location.
A. Component Names
Drive Enclosure
250 Configuration Guide (Basic)