(2) Click the [Set] button.
A confirmation screen appears.
(3) Click the [OK] button.
Setting of the audit log starts.
(4) Check the setting completion message and click the [Done] button.
The screen returns to the [Audit Log] screen.
Monitoring Server (SNMP Manager) Settings
Install and set up the monitoring software on the server side.
Refer to the manual for the monitoring software to install and set the monitoring software.
Note
Register the file that was downloaded in Step 6 "Download the MIB file" in "SNMP Trap Setup" (page 161)
as the MIB definition file for the monitoring software.
8. Monitoring Settings
Monitoring Server (SNMP Manager) Settings
175 Configuration Guide (Basic)
To Next Page
Loading...
