(3) Select the Manager No. that was set in Step 3 for [Manager No.], set the required items, and click
the [OK] button.
The screen returns to the trap list of the [Setup SNMP Agent Trap] screen.
(4) Check the trap that was set in Step (3) is added in the trap list and click the [Set] button.
A confirmation screen appears.
(5) Click the [OK] button.
The SNMP Trap settings are applied.
(6) Check the setting completion message and click the [Done] button.
The screen returns to the [Network] screen.
6 Download the MIB file.
Download the MIB file that is registered in the ETERNUS DX.
(1) Click [Download MIB File] in [Action].
The [Download MIB File] screen appears.
(2) In the [Download MIB File] screen, set the required items and click the [Download] button.
Note
Select the "The ServerView control code is added to the comment line of the MIB definition
file" checkbox when downloading the MIB file for monitoring the ETERNUS DX by ServerView.
8. Monitoring Settings
Various Notification Settings
166 Configuration Guide (Basic)
To Next Page
Loading...
