Fujitsu ETERNUS DX S5 Series - Drive Enclosure; Front; Figure 66 Front View of a 2.5 Type Drive Enclosure; Figure 67 Front View of a 3.5 Type Drive Enclosure

Drive Enclosure
Drives and an operation panel are installed in the front of the drive enclosure. I/O modules and power supply
units are installed in the rear.
Front
This section provides the names of the components in the front of a drive enclosure.
■
2.5" Type
Figure 66
Front View of a 2.5" Type Drive Enclosure
Slot#0 Slot#1 Slot#2 Slot#3 Slot#4 Slot#5 Slot#6 Slot#7 Slot#8 Slot#9
Slot#10 Slot#11 Slot#12 Slot#13 Slot#14 Slot#15 Slot#16 Slot#17 Slot#18 Slot#19 Slot#20 Slot#21 Slot#22 Slot#23
1
3 3
2
1 Operation panel (refer to "■ Operation Panel" (page 248))
2 2.5" drive (refer to "■ Drives" (page 250))
3 Flange cover
■
3.5" Type
Figure 67 Front View of a 3.5" Type Drive Enclosure
1
3 3
2
Slot#0 Slot#3Slot#1 Slot#2
Slot#4
Slot#8
Slot#11
Slot#7Slot#5
Slot#6
Slot#9 Slot#10
1 Operation panel (refer to "■ Operation Panel" (page 248))
2 3.5" drive (refer to "■ Drives" (page 250))
3 Flange cover
A. Component Names
Drive Enclosure
243 Configuration Guide (Basic)