ETERNUS DX500 S5/DX600 S5/DX900 S5
■
From Turning On the Power to Completion of the Initial Setup
For details about the ETERNUS Web GUI operations affixed with the ( ) icon, refer to the FUJITSU Storage
ETERNUS video site in addition to this manual. (See the "Configuration Guide (Basic)" section in https://
www.fujitsu.com/global/products/computing/storage/eternus/video-library/afdx/index.html.)
When using power synchronization, perform the procedure described in "Power Synchronized Unit Connection"
(page 58).
Completion of the initial setup
Turn on the ETERNUS DX
u "Powering On"
Start ETERNUS Web GUI
u "ETERNUS Web GUI Startup"
Perform the initial setup
u "Storage Management (Initial Setup 1)"
Prepare the administration terminal
u "Preparation and Setup for
the Administration Terminal"
ETERNUS DX
: Required
: Optional
: ETERNUS Web GUI operation
Administration terminal
Connect LAN cables
Operation management terminal
u "LAN Cable Connection(for Operation Management)"
1. Configuration Workflow
ETERNUS DX500 S5/DX600 S5/DX900 S5
20 Configuration Guide (Basic)
To Next Page
Loading...
