2 Set the parameters for all of the selected ports.
The following explains how to change the port parameters when the port mode is "CA".
The main setting items are as follows.
• Select Port
- Port
• General Information
- iSCSI Settings
• iSCSI Name
• Alias Name
- TCP/IP Settings
• IP Version
• IP Address
• Subnet Mask
• Gateway
• IPv6 Link Local Address
• IPv6 Connect IP Address
• IPv6 Gateway
• TCP Port No.
• TCP Window Scale
• VLAN ID
• Jumbo Frame
- Security Settings
• CHAP
• CHAP User ID
• New Password
• Confirm new Password
7. Host Interface Management
Modify Port Parameters
140 Configuration Guide (Basic)
To Next Page
Loading...
