Caution
If the WWN is not displayed when clicking the [Rediscover] button, make sure that
there is no error in the connection environment, such as the connection between the
host and the switch, and the CA port settings of the ETERNUS DX. If there is no error in
the connection environment, contact the Support Department, or specify the WWN
manually.
(3) Click the [Add] button.
nWhen registering a host by manually specifying the host
(1) Click the [Manual Input] tab.
(2) Click the [Add] button.
The [Add FC/FCoE Host] screen appears.
(3) Manually specify the WWN of the host that is to be registered.
7. Host Interface Management
Add Host Groups
150 Configuration Guide (Basic)
To Next Page
Loading...
