5 Select a CA port group to configure a host affinity, and click the [OK] button.
The display returns to the initial screen.
Note
• If a specific host group has been selected in the "Host Group" field, CA port groups for which the
affinity mode is "OFF" are not displayed.
• If "All" has been selected in the "Host Group" field, CA port groups with any of the following
conditions are not displayed:
- The affinity mode is "ON"
- Member CA ports that are being used in another CA port group
- CA port groups that are being used by other host affinities
7. Host Interface Management
Host Affinity Creation
155 Configuration Guide (Basic)
To Next Page
Loading...
