From Completion of the Initial Setup to Completion of the Configuration (When Using the
ETERNUS DX
Host (server)
Set the firewall
u "Firewall Settings"
Prepare the server for connection
u "Server Connection Preparation"
: Required
: Optional
: ETERNUS Web GUI operation
Completion of the configuration
Completion of the initial setup
Set the ETERNUS DX for connection
u "Smart Setup Wizard"
Configure the monitoring settings
u "8. Monitoring Settings"
Configure the power control settings
u "9. Power Control Setup"
Check the system status
u "10. System Status Check"
Set the date, SNMP and Syslog
u "Initial Setup 2 (Optional)"
1. Configuration Workflow
To Next Page
Loading...
