Fujitsu ETERNUS DX S5 Series - Page 22

■
From Completion of the Initial Setup to Completion of the Configuration (without Using the
Smart Setup Wizard)
For details about the ETERNUS Web GUI operations affixed with the ( ) icon, refer to the FUJITSU Storage
ETERNUS video site in addition to this manual. (See the "Configuration Guide (Basic)" section in https://
www.fujitsu.com/global/products/computing/storage/eternus/video-library/afdx/index.html.)
ETERNUS DX
Host (server)
Set the firewall
u "Firewall Settings"
Prepare the server for connection
u "Server Connection Preparation"
: Required
: Optional
: ETERNUS Web GUI operation
Set a RAID configuration
u "Configuration Settings for
RAID Groups or Thin Provisioning"
Configure the monitoring settings
u "8. Monitoring Settings"
Configure the power control settings
u "9. Power Control Setup"
Check the system status
u "10. System Status Check"
Set the ETERNUS DX for connection
u "Connection Settings for
the ETERNUS DX"
Completion of the configuration
Completion of the initial setup
Set the date, SNMP and Syslog
u "Initial Setup 2 (Optional)"
1. Configuration Workflow
ETERNUS DX500 S5/DX600 S5/DX900 S5
22 Configuration Guide (Basic)