■
Configuration Example
● Host Group Settings
Refer to "Add FC Host Group" or "Add iSCSI Host Group" in "ETERNUS Web GUI User's Guide" for details.
No. Host Group Host Host response
1 Host Group A Host A – HBA1
Host A – HBA2
Default
2 Host Group B Host B – HBA1
Host B – HBA2
Default
3 Host Group C Host C – HBA1
Host C – HBA2
Host D – HBA1
Host D – HBA2
Default
● CA Port Group Creation
Refer to "Create FC Port Group" or "Create iSCSI Port Group" in "ETERNUS Web GUI User's Guide" for details.
No. CA Port Group Port
1 CA Port Group X Port#0, Port#1
2 CA Port Group Y Port#2, Port#3
Port#0: CM#0 CA#0 Port#0
Port#1: CM#1 CA#0 Port#0
Port#2: CM#0 CA#0 Port#1
Port#3: CM#1 CA#0 Port#1
● LUN Group Settings
Refer to "Add LUN Group" in "ETERNUS Web GUI User's Guide" for details.
No. LUN host group Host LUN LUN
1 LUN Group XX 0 Vol#1
1 Vol#2
2 Vol#3
2 LUN Group YY 0 Vol#10
1 Vol#11
● Host Affinity Creation
Refer to "Create Host Affinity" in "ETERNUS Web GUI User's Guide" for details.
No. Host group CA port group LUN group Description
1 Host Group A
(Default)
CA Port Group X LUN Group XX A host affinity with the affinity
mode set to "ON".
2 Host Group B
(Default)
CA Port Group X LUN Group XX A host affinity with the affinity
mode set to "ON".
3 (*1) Host Group C
(Default)
CA Port Group Y LUN Group YY A host affinity with the affinity
mode set to "ON".
B. Structures for Host Connection
256 Configuration Guide (Basic)
To Next Page
Loading...
