Note
• If the ETERNUS DX is installed at the bottom of a rack, a space for the surplus of cables may not be
available in some racks, preventing the ETERNUS DX from being pulled out when maintenance work is
required. In this case, secure a space of 1U or more at the bottom when installing the storage system.
• To install an enclosure, power distribution units, power synchronized units, and UPS units in a single
rack, mount the devices in the following order (from bottom to top).
Rack
Controller
enclosure
Power distribution unit/
Power synchronized unit
High-density
drive enclosure
2.5"/3.5" type
drive enclosure
UPS
1
2
3
4
5
Installation
order
3. Rack Installation
29 Configuration Guide (Basic)
To Next Page
Loading...
