146
Chapter 5 Operations after OS Installation
3 Click [Expert Mode] on the [Broadcom Teaming Wizard].
4 Specify [Team Name], [VLAN ID], and [VLAN Name] in the [Create New VLAN]
window.
The [Team Name] is not displayed when the [Add VLAN] window appears.
The [VLAN ID] should be identical with the switch setting.
The [VLAN Name] does not need to be identical with the switch setting.
` You cannot use a "VLAN ID" or "VLAN Name" that has already been used. Enter another set
value.
5 When the setting for the team is completed, click [OK].
6 Click [Apply] to apply the settings.
After the network is temporarily disconnected, a window is displayed. Click [Yes (Y)].
To Next Page
Loading...
Need help?
General