35
PRIMERGY TX120 User’s Guide
1
Overview
2 Have the label side of the CD-ROM forward, position the hole of the disc to the
projection on the center of the tray, and then set the CD-ROM firmly until it
clicks.
If the disc is not set properly, it may not be played or ejected.
3 Press the CD-ROM eject button.
The tray is inserted into the server and CD-ROM is set.
` When CD-ROM is set, the CD-ROM access LED is lit. To do next operation, confirm that the
LED is off.
Ejecting the CD-ROM
To eject the CD-ROM, confirm that the CD-ROM access LED is off and then press the CD-ROM eject
button.
CD-ROM tray
To Next Page
Loading...
Need help?
General