85
PRIMERGY TX120 User’s Guide
3
OS Installation Using ServerStart
z Checking the Number of Servers
• When you have only one server, use it as the remote resource server, PXE server, and DHCP service
server. Check it for the required amount of free space.
• When you have multiple servers
• Check if a server performing the DHCP service exists. If not, decide a server for the DHCP
service.
• When there are multiple resources, they can be divided and stored in multiple remote resource
servers.
z Checking Server Free Space
The following table shows the amount of free space required for each installation resource.
Calculate the total resource size. Check that the remote resource server / PXE server has enough free
space (free space greater than the space required for the resources). When the amount of free space is
insufficient, you must use more remote resource servers.
table: Free Space Required for Resources
Resource Required free space
ServerStart Disc 1 approx. 650MB
ServerStart Disc 2 approx. 450MB
Windows Server 2003 644MB
Windows Server 2003 Service Pack 1 389MB
Windows Server 2003 R2, Standard Edition Disc 1 609MB
Windows Server 2003 R2, Standard Edition Disc 2 125MB
Windows Server 2003 R2, Enterprise Edition Disc 1 610MB
Windows Server 2003 R2, Enterprise Edition Disc 2 125MB
Windows Server 2003 R2, Standard x64 Edition Disc 1 629MB
Windows Server 2003 R2, Standard x64 Edition Disc 2 172MB
Windows Server 2003 R2, Enterprise x64 Edition Disc 1 631MB
Windows Server 2003 R2, Enterprise x64 Edition Disc 2 172MB
To Next Page
Loading...
Need help?
General