Fujitsu Primergy TX120 - Page 87

87
PRIMERGY TX120 User’s Guide
3
OS Installation Using ServerStart
 Installing ServerStart
1 Insert the ServerStart Disc 1 CD-ROM into the PXE server.
The [Fujitsu Siemens ServerStart Setup] window appears.
When the [Fujitsu Siemens ServerStart Setup] window does not appear, execute "SeStSetup.exe"
in the CD-ROM.
2 Check [Classic+Remote Installation], [PXE Server] and [Data packages for
Remote Installation], and click [OK].
For [Classic + Remote Installation] and [Data packages for Remote Installation], check the items
of the corresponding OS.
The setup window appears.
3 Click [Next].
The [Destination Folder] window appears.
4 Select the installation folder and click [Next].
To change the installation folder, click [Browse] and select the folder.
The [Selection of LAN card] window appears.