Field Value
Compression Select whether data compression should be used.
The function is activated by choosing 7#,.
The function is not activated by default.
TCP Keepalives Select whether the device is to send keepalive packets.
The function is activated by choosing 7#,.
The function is activated by default.
Logging Level Select the syslog level for the syslog messages generated by
the SSH Daemon.
Possible settings:
• 2" (default value) Fatal and simple errors of the
SSH Daemon and information messages are recorded.
• ",: Only fatal errors of the SSH Daemon are recorded.
• 7 : Fatal and simple errors of the SSH Daemon are re-
corded.
• 4#$: All messages are recorded.
Fields in the Authentication and Encryption Parameters menu
Field Value
Encryption Algorithms Select the algorithms that are to be used to encrypt the SSH
connection.
Possible options:
• '47
• (, 0
• 7
• 7
'47, (, 0 and 7 and are enabled by default.
Hashing Algorithms Select the algorithms that are to be available for message au-
thentication of the SSH connection.
Possible options:
5 System Management Funkwerk Enterprise Communications GmbH
96 funkwerk W1002/W2002/WIx040/WIx065
To Next Page
Loading...
Need help?
General
