Funkwerk W1002 User Manual

Field Value
• ?4
• :
• @!?4
?4, : and @!?4 are enabled by default.
Fields in the Key Status menu
Field Value
RSA Key Status The status of the RSA key is displayed here.
If an RSA key has not been generated yet, -" ;" is
displayed in red and a link, ;", is provided. If you select
the link, the generation process is triggered and the view is up-
dated. The status ;"$ is displayed in green. When
generation has been completed successfully, the status
changes from ;"$ to ;". If an error occurs
during generated, -" ;" and the ;" link are
displayed again. You can then repeat generation.
If the status 6 is displayed, generation of a key is not
possible, for example because there is not enough space in the
FlashROM.
DSA Key Status The status of the DSA key is displayed here.
If a DSA key has not been generated yet, -" ;" is
displayed in red and a link, ;", is provided. If you select
the link, the generation process is triggered and the view is up-
dated. The status ;"$ is displayed in green. When
generation has been completed successfully, the status
changes from ;"$ to ;". If an error occurs
during generated, -" ;" and the ;" link are
displayed again. You can then repeat generation.
If the status 6 is displayed, generation of a key is not
possible, for example because there is not enough space in the
FlashROM.
Funkwerk Enterprise Communications GmbH
5 System Management
funkwerk W1002/W2002/WIx040/WIx065 97

Funkwerk W1002 Specifications

General

Brand	Funkwerk
Model	W1002
Category	Wireless Access Point
Language	English