Field Description
able, encrypt data exchange between the TACACS+ server and
the network access server (your device). The maximum length
of the entry is 32 characters.
Priority Assign a priority to the current TACACS+ server. The server
with the lowest value is the one used first for TACACS+ login
authentication. If this does not respond or access is denied
(only if Policy = -"0""3), the entry with the
next-highest priority is used.
The available values are to , the default value is .
Entry Active Select whether this server is to be used for login authentication.
The function is activated by choosing 7#,.
The function is activated by default.
The Advanced Settingsmenu consists of the following fields:
Fields in the Advanced Settings menu
Field Description
Policy Select the interpretation of the TACACS+ response.
Possible values:
• -"0""3 (default value): The TACACS+ serv-
ers are queried in order of their priority (see Priority) until a
positive response is received or a negative response is re-
ceived from an authoritative server.
• "0""3 : A negative response to a request is ac-
cepted, i.e. a request is not sent to another TACACS+ server.
The device's internal user administration is is not turned off by
TACACS+. It is checked after all TACACS+ servers have been
queried.
TCP Port The default TCP port ( &). The value cannot be changed.
Timeout Enter time in seconds for which the NAS is to wait for a re-
sponse from TACACS+.
If a response is not received during the wait time, the next con-
figured TACACS+ server is queried (only if Policy = -
5 System Management Funkwerk Enterprise Communications GmbH
106 funkwerk W1002/W2002/WIx040/WIx065
To Next Page
Loading...
Need help?
General
