Field Description
and reboot your device.
• 2!" ,$$: In this menu, you can import other lan-
guage versions of the Funkwerk Configuration Interface in-
to your device. You can download the files to your PC from
the download area at www.funkwerk-ec.com and from there
import them to your device.
• 6!" 5 " ": In this menu, you can start an
update of the system software, the ADSL logic and the
BOOTmonitor.
• 7E!" $": The configuration file Current fi-
lename in flash memory is transferred to your local host. If
you press the Go button, a dialog box is displayed, in which
you can select the storage location on your PC and enter the
required file name.
• 7E!" $" "0 "" ":
The active configuration from the RAM is transferred to your
local host. If you press the Go button, a dialog box is dis-
played, in which you can select the storage location on your
PC and enter the required file name.
• +!5: The configuration file Currnet Filename in Flash is
saved as New Filename im Flash.
• @: The name of the configuration file Current Filename
in Flash is changed to New Filename im Flash.
• 4," +$": The configuration file Current fi-
lename in flash memory is deleted.
• 4," ,: The file Current filename in flash memory
is deleted.
Encryption of the Config-
uration
Only for Action = 2!" $", 7E!"
$", 7E!" $" "0 ""
", selct whether the selected Action is to be encryp-
ted.
The function is activated by selecting 7#,.
The default state of the function is Disabled.
If the function is enabled, you can enter the passphrase.
Passphrase Only for Configuration Encryption = #,
Funkwerk Enterprise Communications GmbH
11 Maintenance
funkwerk W1002/W2002/WIx040/WIx065 187
To Next Page
Loading...
Need help?
General
