Fig. 15: Funkwerk Configuration Interface Login
Start the configuration interface as follows:
(a) Enter the IP address of your device in the address line of your Web browser.
With DHCP server:
• the IP address that the DHCP server assigned to your device
Without DHCP server:
• With direct connection to the configuration PC: the fallback IP address
• The fixed IP address assigned via the ComPoint Manager
Press the Enter (Return) key.
(b) Enter in the User field and in the Password field.
Setting up a wireless network
If you run your device in Access Point mode, you must set up a wireless network.
Proceed as follows:
(1) Go to Wireless LAN -> WLANx -> Wireless Module Settings -> .
(2) In Operating Mode, select ".
(3) Leave the default settings in all other fields.
(4) Click OK.
(5) Go to Wireless LAN -> WLANx -> Wireless Networks (VSS) -> .
(6) In Network name (SSID) enter, for example, .
Funkwerk Enterprise Communications GmbH
2 Quick Install Guide
funkwerk W1002/W2002/WIx040/WIx065 21
To Next Page
Loading...
