Funkwerk W1002 - Page 44

Property Value
Available sockets:
Serial interface V.24 9-pin serial Sub-D port
MMC/SD card slot With protective cover if card is inserted.
Relay switching contact
N/O
30V AC/DC 0.5 A potential-free, software configurable, switch-
able
Ethernet interface RJ45 socket
Antennas:
Antenna connection RTNC socket
Transmit Power (WLAN) max. 100 mW (20 dBm) EIRP
Receiver sensitivity In the 5 GHz frequency range
PER 10 %
6 mbps -90 dBm, 9 mbps -88 dBm,
12 mbps -86 dBm, 18 mbps -84 dBm,
24 mbps -79 dBm, 36 mbps -76 dBm,
48 mbps -71 dBm, 54 mbps -69 dBm
In the 2.4 GHz frequency range
PER 8 %:
1 mbps -98 dBm, 2 mbps -93 dBm;
5.5 mbps -92 dBm, 11 mbps -88 dBm;
PER 10 %: 6 mbps -92 dBm, 9 mbps -90 dBm;
12 mbps -88 dBm, 18 mbps -86 dBm;
24 mbps -82 dBm, 36 mbps -78 dBm;
48 mbps -73 dBm, 54 mbps -71 dBm
Modulation Modulation IEEE802.11 standards: a,h (5 GHz) g,b (2.4 GHz)
Modulation types: 11, 5.5, 2 and 1 mbps (DSSS) 2.4 GHz;
54, 48, 36, 24, 18, 12, 9 and 6 mbps (OFDM) 2.4 and 5 GHz
3 Technical Data Funkwerk Enterprise Communications GmbH
36 funkwerk W1002/W2002/WIx040/WIx065