Menu Function
Click the arrow to open the list. Select the required option using
the mouse.
Internal lists e.g.
Click . A new list entry is created. Enter the correspond-
ing data. If list input fields remain empty, these are not saved
when you confirm with OK. Delete the entries by clicking the
icon.
Display of options that are not available
Options that are not available because they depend on the selection of other options are
generally hidden. If the display of these options could be helpful for a configuration de-
cision, they are instead greyed out and cannot be selected.
Important
Please look at the messages displayed in the sub-menus. These provide information
on any incorrect configurations.
Warning symbols
Visual aids Meaning
This symbol appears in messages referring you to settings
that were made with the Setup Tool.
This symbol appears in messages referring you to the fact
that values were entered or selected incorrectly.
Pay particular attention to the following message:
"Warning: changes not supported by the Setup Tool!". If you change them with the
Funkwerk Configuration Interface, this can cause inconsistencies or malfunctions.
Therefore, it is recommended that the configuration is continued with the Setup Tool.
4 Access and Configuration Funkwerk Enterprise Communications GmbH
66 funkwerk W1002/W2002/WIx040/WIx065
To Next Page
Loading...
Need help?
General
