GE Security Concord 4 Installation Manual

Chapter 3
Programming
97
2. Press # again and the display shows OUTPUT 1.
3. Press A or B to select the desired output (1 to 4), then press #.
4. With the display showing PARTITION ASSIGN 1, press 1 to 6 to select the desired partition. Press
# to confirm the partition.
5. Press A or B until the display shows CONFIGURATION tttrr (current setting).
6. Enter the desired five-digit configuration number for this relay. Press # to confirm the setting.
7. Press # and repeat the process until all outputs are programmed.

GE Security Concord 4 Specifications

General

Brand	GE Security
Model	Concord 4
Category	Security System
Language	English