Chapter 3
Programming
61
Cancel message (02007)
Default setting is On.
This setting determines whether or not the panel displays a cancel message after the user disarms the system to
clear an alarm condition. To turn cancel message on or off, do the following:
1. With the display showing CANCEL MESSAGE OFF/ON (current setting), press 1 (off) or 2 (on).
2. The display flashes the entered setting. Press # and the display shows the new setting.
Pager delay (02008)
Default setting is 15 seconds.
This setting determines how long a report is delayed to a pager, after the panel dials the pager number.
Note: The Pager delay time should not be set below 5 seconds, unless absolutely necessary.
To set the pager delay time, do the following:
1. With the display showing PAGER DELAY nn SECS (current setting), enter a delay time (0 to 30
seconds).
2. The display flashes the entered setting. Press # and the display shows the new setting.
Call wait cancel (02009)
Default setting is None.
This feature sets up a dialing prefix to disable the call waiting feature before the panel makes its first dialing
attempt to any programmed central monitoring station or downloader phone number. The prefix can be up to
eight digits.
• To enter pauses, press C.
•To enter *, press and hold 7 for one second.
•To enter #, press and hold 9 for one second.
Note: We recommend that you program two pauses in any Call wait cancel dialing prefix to ensure proper operation.
To set up Call wait cancel, do the following:
1. With the display showing CALL WAIT CANCEL __ (current setting), enter the desired prefix.
2. The display flashes the entered setting. Press # and the display shows the new setting.
To delete the Call wait cancel prefix, with the display showing CALL WAIT CANCEL __ (or current
setting), press D.
CAUTION: Do not change this option from its default until verifying with the customer that he has call waiting with his
phone service provider. Changing this option from its default without call waiting will prohibit the panel from calling the
central station.
To Next Page
Loading...
Need help?
General
