GE Security Concord 4 Installation Manual

Chapter 3
Programming
69
No usage time (0315 to 0365)
Default setting is None.
This setting determines how many days a partition can remain disarmed before the panel sends a no usage
report to the central monitoring station and stores the event in the history buffer.
When this feature is set:
• This timer decreases by one at STIME each day the selected partition remains disarmed.
• If the timer gets to 0 at STIME, the panel sends a no usage report to the central monitoring station and
stores the event in the history buffer.
• If the partition is armed before the timer reaches 0, the timer resets to the programmed setting.
When this feature is not set (default), the panel does not send or log no usage reports.
To set the No usage time, do the following:
1. With the display showing NO USAGE TIME (current setting), enter the number in days (2 to 255).
2. The display flashes the entered setting. Press # and the display show the new setting.
To turn off No usage time, with the display showing NO USAGE TIME (current setting), press D.

GE Security Concord 4 Specifications

General

Brand	GE Security
Model	Concord 4
Category	Security System
Language	English