Index
Z.2 EST3 Installation and Service Manual
C
cabinet coverage • 1.29
cable properties • B.3
cables
SAC bus • 3.3
calculating maximum wire capacitance per foot • B.4
capacitance of SAC bus • 3.3
card access equipment • 3.2
card readers
additional • 3.27
anti-passback application • 3.11
definition • 3.6
dual LED control • 3.31, 3.48
handicap access door application • 3.26
two-person rule application • 3.48
central monitoring station application • 3.14
central monitoring stations • 3.3
Central station connection using FireWorks • C.4
Central station with local bell timeout using a 3-
MODCOM • C.5
Central station via 3-MODCOM • C.6
chain errors • 8.55
chassis
19-inch rack installation • 5.22
circuit common • 3.8, 3.23, 3.44, 3.46
circuit modules
removing or replacing • 8.4
command lists
events with • 3.15
multiple card readers application • 3.31
muster application • 3.34
remote controls application • 3.46
two-person rule application • 3.49
common door access application • 3.16
communication fault • 8.64
compiler errors • 6.4
configuring CRC • 3.8
continuous locks • 3.35
continuous locks application • 3.35
CPU memory calculations • B.26
CRC
description • 3.4
CRC
battery • 3.5
input circuits • 3.5
jumpers • 3.8
lock output • 3.7
options • 3.4
output circuits • 3.6
power supply from cabinet • 3.8
resetting • 3.18, 3.19, 3.20
CRCRL • 3.4
CRCSND
delayed egress application • 3.18
description • 3.4
emergency exit door application • 3.24
installation • 3.4
CRCXF • 3.5
D
data network specifications • B.2
DC power supply application • 3.42
delayed egress application • 3.18
delayed egress time • 3.18, 3.19
design considerations
audio applications • 1.33
design considerations
firefighter telephone • 1.42
detector cleaning • 7.6
device sharing • 3.17
device trouble • 8.59
device type
PIR in maglock peripherals • 3.29
device type fault • 8.63
diagnostic tools
addressable analog • 8.70
Signature • 8.51
direct connect to panel • 3.7, 3.32
door ajar sounder • 3.4
door contact
CRC input circuit • 3.5
delayed egress application • 3.19, 3.20
emergency exit door application • 3.24, 3.25
door holders • 3.6
door open timer • 3.9
downloading
problems • 8.6
dual LEDs • 3.6, 3.31, 3.48
dummy loads • 3.23, 3.34
E
elevator control application • 3.21
emergency exit door application • 3.24
emergency exit sounder • 3.4
emergency exit sounder time • 3.20, 3.25
energized system precaution • 5.3
equipment
basic access control system • 3.2
error messages • 8.53
ESD precaution • 5.3
evacuation (EVAC) channel • 1.37
external modem
connecting for the remote diagnostics utility • 5.53
F
feature/function domain • 1.30
fiber optic cable worksheet • B.28
firefighter telephone • 1.15
floor access • 3.21
G
general channel • 1.37
ground fault • 8.64
ground fault detection • 3.8, 3.44, 3.46
ground faults • 8.78
Signature data circuit • 8.39
H
handicap
privileges • 3.26
timers • 3.27
handicap access door application • 3.26
hardware
adding • 8.6
substitution • 8.5
hardware problems • 8.5
high and low card readers • 3.30
Holdup alarm • C.8
To Next Page
Loading...
Need help?
General