GE eBike BASIC - Error Code Bits MAE

2018112-069 Rev. F eBike II, eBike II L, eBike II EL - 137 -
error Code BIts Mae
Bit Error Reaction Display / Info Troubleshooting
0 Error seat sensor Module is switched off Internal error - check cable sensor <-> MAE - -
- check cable motor <-> MAE
- if error persists:
replace seat motor
1 Seat no movement Module is switched off Internal error - check cable sensor <-> MAE - -
- check cable motor <-> MAE
- if error persists:
replace seat motor
2 Wrong cabling Module is switched off Internal error - check cable sensor <-> MAE
- check cable motor <-> MAE
- replace cables
3 not used
4 +24V out of range Warning - check power supply
- check connections:
power supply to LRE
cable LRE <-> MAE
- replace MAE
5 not used
6 not used
7 Safety state mode Module is switched off Internal error - restart eBike (OFF / ON)
- if error persists: replace MAE
8 not used
9 CAN zykl. Timeout Module is switched off Internal error - restart eBike (OFF / ON)
- if error persists:
check cable LRE <-> MAE
- replace MAE