GE eBike BASIC - Alignment Ouput: Analog Load value“; Alignment Output: Analog Heartrate“; Alignment Ouput: Analog Systole“





- 56 - eBike II, eBike II L, eBike II EL 2018112-069 Rev. F
alIgnMent „ouput: analog load value“
The output voltage representing a special load value of the
ergometer is dened with this setting.
It is possible to adjust the voltage and / or the load value.
Select the parameter by use of the arrow keys and conrm
with „Enter“
Adjust the value by using the arrow keys and store the
setting with SET.
Setting range:
GAIN:(voltage) 20 mV to 10000 mV in steps of 2 mV
GAIN (load) 20 to 999 Watt in steps of 10 Watt
alIgnMent „output: analog Heartrate“
The output voltage representing a special heartrate is
dened with this setting.
It is possible to adjust the voltage and / or the heartrate
value.
The setting is performed as described above under
Alignment „Ouput: Analog Load value“
Setting range:
GAIN (voltage): 500 to 2000 mV in
2 mV steps
GAIN (heartrate): 50 to 250 bpm in
10 bpm steps
alIgnMent „ouput: analog systole“
The output voltage representing the systolic value is
dened with this setting.
It is possible to adjust the voltage and / or the systolic
value.
The setting is performed as described above under
Alignment „Ouput: Analog Load value“
Setting range:
GAIN (voltage): 500 to 2000 mV in
2 mV steps
GAIN (systole): 50 to 250 mmHg in
5 mmHg steps
OUTPUT 2 Heart
GAIN 1000 mV
GAIN 100
♥
ENTER
OUTPUT 3 Systole
GAIN 1000 mV
GAIN 100 mmHg
ENTER
alignMent of analog output „load“
OUTPUT 1 Load
GAIN 3000 mV
GAIN 300 Watt
ENTER
OUTPUT 1 Load
GAIN 3000 mV
GAIN 300 Watt
SET