GE eBike BASIC - NIBP Bloodpressure Unit; Assembly

2018112-069 Rev. F eBike II, eBike II L, eBike II EL - 35 -
nIBp Bloodpressure unIt
asseMBly
The NIBP module consists of several components.
The complete measurement electronics is placed on the
BDE board.
The valves and the power driver for the pump are placed
on a separate board, located in an sound and vibration
absorbing foam carrier.
The pump is also placed in a separate sound absorbing
foam carrier.
valve and driver pcb
puMp and coMpenSating container
bloodpreSSure MeaSuring electronicSe (bde)