GE LOGIQ 7

GE HEALTHCARE
DIRECTION 2286865, REVISION 14 LOGIQ™ 7 SERVICE MANUAL
Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later) 8-13
8-2-6-7 Printer Registration
1.) Select Utility > Connectivity > Button.
2.) Write down the printer names which are registered to Print1 through Print4.
3.) Click on >> to add Printflow View.
Figure 8-63 Printer Registration
Button Active Image Printer
Print1
Print2
Print3
Print4
Table 8-5 Printer Registration
Select Print x
button to
display the
printer name
here.