GE LOGIQ 7

GE HEALTHCARE
DIRECTION 2286865, REVISION 14 LOGIQ™ 7 SERVICE MANUAL
Section 8-2 - Software Loading Procedures for BT09 (R8.x.x or later) 8-27
8-2-8-6 Date and Time Setting
1.) Select Start > Settings > Control Panel > Date and Time.I
2.) Click on Time Zone tab.
3.) Select the appropriate time zone. Then click on Apply.
4.) Then click on Date & Time tab.
Figure 8-84 Date and Time
Figure 8-85 Time Zone