GE Simon 60-875 - Option 05: Secondary Phone Number; Option 06: Downloader Phone Number; Option 07: Account Number

Simon Security System 25
Option 05: Secondary Phone Number
(Default = off)
Lets you program up to a 26-digit central monitoring station
receiver/numeric pager/voice event notification phone num-
ber for monitored systems (on), or delete an existing second-
ary phone number (off).
•Press Test for each required pause
•Press Add for a *
•Press Delete for a #
Each pause, * and # uses one of the 26 available places.
Note
For numeric pagers, add 2 pauses at the end of the number.
Some pagers may require 3, 4 or more additional pauses to work
correctly. Pagers that require the panel to dial more than 26 digits
will not work. The panel calls a numeric pager twice for each
report. Silent alarms report to a pager as an intrusion alarm. See
the Table “Pager Reporting Messages” for more reporting infor-
mation.
Pressing DONE is required if you enter fewer than 26 digits. The
phone number is automatically stored without pressing DONE if
all 26 places are used.
¾ To set Secondary Phone Number, press:
1. Add
2. Option #
3. 05
4. Use the numbered keys to enter the phone num-
ber (up to 26 digits).
5. DONE
¾
To delete Secondary Phone Number, press:
1. Delete
2. Option #
3. 05
4. DONE
Option 06: Downloader Phone Number
(Default = off)
Lets you program up to a 26-digit phone number for a com-
puter modem for using ToolBox Downloader (on), or delete
an existing phone number (off).
Press Test for each required pause, Add for a *, and Delete
for a # (each of which uses one of the 26 available places).
Note
Pressing DONE is required if you enter fewer than 26 digits. The
phone number is automatically stored without pressing DONE if
all 26 places are used.
¾ To set Downloader Phone Number, press:
1. Add
2. Option #
3. 06
4. Use the numbered keys to enter the phone num-
ber (up to 26 digits).
5. DONE
¾
To delete Downloader Phone Number, press:
1. Delete
2. Option #
3. 06
4. DONE
Option 07: Account Number
(Default = 00000)
Lets you program up to a 10-character alphanumeric account
number (on) or delete an existing account number (off).
To enter letters (A - F only), press 9 then the Minutes + but-
ton. The panel announces the letter A. Continue pressing the
Minutes + button to progress through the alphabet.
Note
The CID format only supports account numbers with letters B
through F, or numbers 0 through 9 (or a combination of those let-
ters and numbers).
Pressing DONE is required if you enter fewer than 10 characters.
The account number is automatically stored without pressing
DONE if 11 characters are entered, of which only the first 10 are
stored.
¾ To set Account Number, press:
1. Add
2. Option #
3. 07
4. Use the keys to enter the account number (up to
10 characters).
5. DONE
¾
To delete Account Number, press:
1. Delete
2. Option #
3. 07
4. DONE